CNC Production Cylindrical Grinder
This is a compact machine available for both straight and Angular plunge for grinding of small & medium sized components. Few key features are
Cross slides moves on highly sensitive and stick free Swiss make linear guide ways Auto lubrication for various sliding parts for better response Effective guarding design makes it TPM friendly
Machine is ideally suited for
large volume manufacturing of small parts like camshafts, drive shafts, small transmission shafts of small engines & electric motor shafts, high precision fuel injection parts etc.
|
| SPECIFICATION OF
eGRIND 200 CNC | | Capacities |
Units | | | Swing Diameter |
mm | 200 |
| Distance Between Centers | mm |
250 | | Grinding Length |
mm | 250 |
| Grinding Diameter (max) | mm |
100 | | Maximum Weight Between Center |
kg | 30 |
| Work Head | Type |
Dead center(Antifriction) | | | | | | Wheel Head | |
| | Wheel Surface Speed |
m/sec | 33 | |
Grinding Wheel ODxID | mm |
400x127(450x127) | | Grinding Wheel Width |
mm | 50 | | Minimum Wheel
Size OD | mm | 280(300) |
| Motor Power | kW |
3.7(5.5) | | | | | | Wheel Slide |
| | |
Guideway Type | | LM(Schneeberger) |
| Movement | | Ballscrew dia. 32 | | Slide Stroke | mm | 160 | |
Feed Servo Motor torque | Nm |
8 Nm | | Rapid Feed Rate (on dia) |
m/min | 10 | |
(Feed back resolution) Minimum Increment/Pulse | mm |
0.0001 | | | | | | Work Head | | | | Spindle Morse Taper | |
MT4 | | Spindle rpm |
rpm | 100-1000(infinelely variable) | |
Motor | | 8Nm |
| | | |
| Table | | | |
Speed | m/min | 10 |
| Swivel Angle | Degree |
-3 to +2 | | Table Stroke |
mm | 420 |
| Minimum Increment/Pulse | mm |
0.0001 | | Feed Servo Motor Torque |
Nm | 8 |
| | | |
| Tailstock | | Sleeve Morse Taper | | MT3 | |
Quill Travel | mm | 25 |
| | | |
| Note: | a)
[] Optional
b) All specifications and design subject to alteration without notice. |
|
